ADVERTISEMENT — SPONSORED CONTENT
Limited-Time Offer — Save 50% + Free Shipping on All Orders
660nm + 850nm Dual Wavelength

Lumen Pro™ Red Light Panel

A full-body red and near-infrared light panel built for at-home recovery sessions. Ten minutes a day, no heat, no consumables, nothing to swallow.

  • 120 medical-grade LEDs — 60× 660nm red, 60× 850nm near-infrared
  • Irradiance of 100 mW/cm² measured at 6 inches
  • Built-in 10 / 15 / 20-minute session timer
  • Door-mount, stand or wall bracket — all included
  • Flicker-free driver and EMF below 1 mG at 4 inches
See Current Offer →
Lumen Pro™
The Product

What Is the Lumen Pro?

The Lumen Pro is a photobiomodulation panel — the category of device that delivers concentrated red and near-infrared light to the skin at specific wavelengths. It is roughly the size of a laptop, weighs 6.4 lbs, and hangs on a door or stands on a desk.

It has no heating element, no chemicals and nothing that wears out. The LEDs are rated for 50,000 hours, which works out to more than thirty years at one 15-minute session per day.

Red light at 660nm is absorbed mostly at the surface, in the skin. Near-infrared at 850nm passes further, reaching muscle and joint tissue. The Lumen Pro runs both at once, which is why the panel looks pink-white rather than pure red when it is on.

It is designed as a complement to a normal recovery routine — used after training, at the end of a day on your feet, or in the evening as part of a wind-down.

How it works →
The Mechanism

How Red Light Therapy Works

Cells produce energy in the mitochondria, through an enzyme called cytochrome c oxidase. That enzyme happens to absorb light strongly in the red and near-infrared range — roughly 600 to 900 nanometres.

The working theory in the published literature is that this absorption briefly increases mitochondrial output, which is why the field is called photobiomodulation. Research is active and ongoing; results across studies vary by wavelength, dose and body site.

Potential Benefits

  • Muscle recovery: may help reduce perceived soreness after exercise.*
  • Skin appearance: may support skin tone and texture with consistent use.*
  • Joint comfort: may help ease everyday stiffness in knees, shoulders and hands.*
  • Circulation: may support local blood flow in the treated area.*
  • Sleep routine: an evening session can serve as a screen-free wind-down.*

*These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease. Individual results will vary.

Build

Key Features

1

Dual wavelength, one panel

660nm and 850nm LEDs alternate across the array, so a single session covers both surface and deeper tissue. No mode switching.

2

Flicker-free driver

Cheap panels pulse at mains frequency, which some people find gives them a headache. The Lumen Pro runs a constant-current driver with no visible flicker.

3

Session timer built in

Press once for 10 minutes, twice for 15, three times for 20. The panel shuts itself off — you do not have to watch a clock.

4

Three mounting options included

Over-door hanger, adjustable floor stand and wall bracket all ship in the box. Nothing extra to buy to get it set up.

5

Low EMF, no heat

EMF measures below 1 mG at four inches. The aluminium back plate stays cool enough to touch through a full 20-minute session.

6

Eye protection in the box

Red light is bright. A pair of shielded goggles ships with every panel, and we recommend using them for any face-level session.

Specifications

The Numbers

Every figure below is measured on the shipping unit, not a prototype. If a spec matters to your decision and it isn't listed, email us and we'll measure it.

Read the FAQ →
Wavelengths 660nm red · 850nm near-infrared
LED count 120 (60 per wavelength)
Irradiance 100 mW/cm² at 6 in · 52 mW/cm² at 12 in
Coverage area 13.4 × 8.3 in panel face
Power draw 200W · 100–240V universal
Weight 6.4 lbs (2.9 kg)
LED lifespan 50,000 hours rated
Warranty 3 years, parts and labour
Usage

How to Use It

  1. Hang the panel on a door or set it on the stand, roughly 6 to 12 inches from the area you're treating. Closer means a stronger dose in less time.
  2. Put the goggles on if the panel is anywhere near your face. Press the power button to select 10, 15 or 20 minutes.
  3. Expose bare skin — light does not pass through clothing. Sit or stand still for the session; the panel switches itself off at the end.

Most people run one session a day, four or five days a week. More is not better: the research on photobiomodulation describes a dose-response curve where overexposure gives you less, not more.

✓ 90-Day Money-Back Guarantee

Try it for three months

If the Lumen Pro isn't for you, email us within 90 days of delivery and we'll send a prepaid return label. Once the panel arrives back with us, your refund is issued to the original payment method within 5 business days.

The panel needs to come back in its original box with the mounts and goggles. Beyond that, we don't ask questions and there's no restocking fee.

Full terms on our Terms and Return Policy pages.

Questions

Frequently Asked Questions

How soon would I notice anything?

Honestly, it varies a lot and some people notice nothing. In the published studies, skin-related outcomes are typically measured over 8 to 12 weeks of consistent use, and recovery-related outcomes over shorter windows. If you're expecting something in the first week, this is probably not the right purchase.

Is it safe?

Red and near-infrared light in this range is non-ionising and produces no heat at these intensities. That said: do not look directly into the LEDs, and use the goggles for face-level sessions. If you are pregnant, taking a photosensitising medication, have a history of skin cancer, or have an implanted device, talk to your doctor before using it. This is a wellness device, not a medical treatment.

Does it work through clothes?

No. Fabric blocks essentially all of it. The light has to reach bare skin.

How far should I sit from it?

Six to twelve inches. Closer delivers a stronger dose in less time; further covers more of your body at once. At 6 inches a 10-minute session and at 12 inches a 20-minute session deliver a broadly similar total dose.

Can I use it every day?

You can, though four to five days a week is what most people settle into. Longer or more frequent sessions do not improve results and may do the opposite.

What's the warranty, and where do you ship from?

Three years on parts and labour. Panels ship from our US warehouse; domestic orders arrive in 3–6 business days with free shipping. International shipping is quoted at checkout.

Order

Get Your Lumen Pro

Free shipping, a 3-year warranty and 90 days to change your mind.

$189
Regular price $379 — save 50%
Claim This Offer →

Secure checkout. Pricing and availability subject to change.